Densidad at bigat ng insulation material sa 1 m³
Mahalagang physical property ng thermal insulation ang density o bigat sa kg/m³. Nakasalalay sa gamit kung gaano kahalaga ang bigat ng isang cubic meter.
- Karaniwang magkaugnay ang density at porosity: habang mas maraming closed o stationary air pore, mas mababa ang density at thermal conductivity. Ngunit mahalaga rin ang pore structure, moisture, strength at kondisyon.
- Kailangan ang bigat sa structural load calculation. Hindi maituturing na insulation lamang ang cellular concrete dahil higit 400 kg/m³ ang densidad.
- Kailangan ng protective layer ang karamihan. Tumutulong ang densidad na tukuyin ang kinakailangang tibay; maaaring mas madaling masira ang mababang-density material.
- May espesipikong gamit ang bawat densidad: floor, roof, wall, o high-load road construction.
Densidad ng iba’t ibang insulation
Nag-iiba ito ayon sa uri at modification. Dapat tukuyin ng manufacturer ang bulk density at package weight.
| Uri | Density (kg/m³) | Gamit | |
|---|---|---|---|
| min | max | ||
| Mineral wool | 50 | 200 | Interior, frame at roof insulation |
| EPS foam | 10 | 35 | Exterior at roof insulation |
| Extruded polystyrene | 28 | 60 | Wall, loaded structure, sandwich panel at road |
| Urea-formaldehyde foam | 10 | 10 | Interior at exterior wall cavity |
| Polyethylene foam | 24 | 60 | Floor, wall at engineering system |
| Foam glass | 100 | 400 | Frame, facade at roof |
- Mineral wool: 190–200 kg/m³ para sa ilang roof system at humigit-kumulang 35 kg/m³ para sa frame cavity.
- EPS: karaniwang 10–35 kg/m³. Nakasalalay din ang gamit sa compressive strength, combustibility, water absorption at rekomendasyon.
- XPS: 28–35 kg/m³ ayon sa teknolohiya; ginagamit ang espesyal na dense type sa road construction.
- Urea-formaldehyde foam: 10 kg/m³, napakaporous at fragile ngunit mahusay ang insulation; kailangan ng covering.
- Polyethylene foam: humigit-kumulang 24 kg/m³ para sa ordinary roll at hanggang 60 kg/m³ para sa reinforced o foil-faced type.
- Foam glass: 100–400 kg/m³, matibay, dense at resistant sa aggressive environment. Ginagamit sa roof, facade at foundation; katulad ng basalt wool ang thermal conductivity.
Mga madalas itanong
Magkano ang bigat ng 1 m³ ng insulation?
Nakasalalay sa uri: sampu-sampung kg/m³ ang magaan na roll, samantalang mas mabigat ang dense board at foam glass.
Bakit mahalaga ang densidad ng insulation?
Naaapektuhan nito ang structural load, strength, application at kung minsan ang thermal property.
Maaari bang densidad lamang ang batayan ng pagpili?
Hindi. Isaalang-alang ang thermal conductivity, moisture resistance, strength, combustibility, lugar ng gamit at manufacturer requirement.